Ice-O-Matic GEM0650R Manual de usuario descargar pdf (Pagina 17)

GEM0650/0956/1256 Remote For the Plumber

Page 11

Water Inlet:

The recommended water supply is cold water. Use 3/8 inch O.D. copper tubing, connect to the 3/8 inch male

flare on the back of the cabinet. Install a hand valve near the machine to control the water supply.

Drains:

Ice Machine:

There is one 3/4 inch FPT drain at the back of the cabinet; the drain line is of the gravity type, and 1/4 inch per

foot fall is an acceptable pitch for the drain tubing. There should be a vent at the highest point of the drain line,

and the ideal drain receptacle would be a trapped and vented floor drain. Use only ¾ inch rigid tubing.

Storage Bin:

Install a separate gravity type drain. Insulation of this drain line is recommended.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

Sin comentarios

Ice-O-Matic GEM0650R Manual de usuario Pagina 17